Micromechanical analysis of damage in saturated quasi brittle materials

In this paper, we propose a micromechanical analysis of damage and related inelastic deformation in saturated porous quasi brittle materials. The materials are weakened by randomly distributed microcracks and saturated by interstitial fluid with drained and undrained conditions. The emphasis is put on the closed cracks under compression-dominated stresses. The material damage is related to the frictional sliding on crack surface and described by a local scalar variable. The effective properties of the materials are determined using a linear homogenization approach, based on the extension of Eshelby’s inclusion solution to penny shaped cracks. The inelastic behavior induced by microcracks is described in the framework of the irreversible thermodynamics. As an original contribution, the potential energy of the saturated materials weakened by closed frictional microcracks is determined and formulated as a sum of an elastic part and a plastic part, the latter entirely induced by frictional sliding of microcracks. The influence of fluid pressure is accounted for in the friction criterion through the concept of local effective stress at microcracks. We show that the Biot’s effective stress controls the evolution of total strain while the local Terzaghi’s effective stress controls the evolution of plastic strain. Further, the frictional sliding between crack lips generates volumetric dilatancy and reduction in fluid pressure. Applications of the proposed model to typical brittle rocks are presented with comparisons between numerical results and experimental data in both drained and undrained triaxial tests.     

2 W quasi-white-light based on idler-resonant optical parametric oscillation cascading sum-frequency generation with PPSLT

We present a high power red-green-blue (RGB) laser light source based on cascaded quasi-phasematched wavelength conversions in a single stoichiometric lithium tantalate. The superiority of the experimental setup is: the facula of the incident beam is elliptical to increase interaction volume, and the cavity was an idler resonant configuration for realizing more efficient red and blue light output. An average power of 2 W of quasi-white-light was obtained by proper combination of the RGB three colors. The conversion efficiency for the power of the quasi-white-light over pump power reached 36%. This efficiency and powerful RGB laser light source has potential applications in laser-based projection display et al.     

A new near-infrared fluorescent chemodosimeter for discrimination of sulfide from disulfide

Research on Chemical Intermediates - A new near-infrared fluorescent “turn-on” chemodosimeter (probe 1) based on dicyanomethylene-4H-chromene fluorophore for sulfide was developed....     

Naphthodithiophene-based donor materials for solution processed organic solar cells

As an emerging donor building block, naphthodithiophene (NDT) is causing more concerns in the field of organic semiconductors. With the rigid and coplanar molecule structure, NDT will exhibit more application space relying on its own advantage for facilitating the charge carrier transport. In this review article, we have summarized the development progress on the NDT-based donor materials for solution processed organic solar cells. Discussions and comments on those representative NDT type materials about structure and property are also presented.     

Chiral sensing of Eu(III)‐containing achiral polymer complex from chiral amino acids coordination induction

The β‐diketonate‐based achiral polymer P‐1 could be synthesized by the polymerization of 3,7‐dibromo‐2,8‐dimethoxy‐5,5‐dioctyl‐5H‐dibenzo[b,d]silole ( M1 ) with (Z)?1,3‐bis(4‐ethynylphenyl)?3‐hydroxyprop‐en‐1‐one ( M2 ) via typical Sonogashira coupling reaction. The β‐diketonate unit in the main chain backbone of P‐1 can further coordinate with Eu(TTA)_x [TTA^? = 4,4,4‐trifluoro‐1‐(thiophen‐2‐yl)butane‐1,3‐dionate anion, X = 1, 2, 3] to afford corresponding Eu(III)‐containing polymer complexes. The resulting achiral polymer complex P‐2 (X = 2) can exhibit strong circular dichroism (CD) response toward both N‐Boc‐l and d‐ proline enantiomers. The CD signal was preliminarily attributed to coordination induction between chiral N‐Boc‐proline and the Eu(III) complex moiety. The linear regression analysis of CD sensing shows a good agreement between the magnitude of molar ellipticity and concentration of chiral N‐Boc‐l or d‐ proline, which indicates this kind Eu(III)‐containing achiral polymer complex can be used as a chiral probe for enantioselective recognition of N‐Boc‐l or d‐ proline enantiomers based on Cotton effect of CD spectra. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3080–3086     

海蛎壳粉废弃物负载CuCl_2作为高效、廉价以及可回收催化剂合成炔胺类化合物(英文)

发展了一种经济、简单的海蛎壳粉负载的CuCl2异相催化剂OSP-CuCl2,用来催化醛-炔-胺之间的A3偶联反应.OSP-CuCl2容易通过简单的方法从海蛎壳粉以及CuCl2制备,且显示出高的催化活性以及良好的可循环回收性.在微波辅助以及无溶剂条件下,以OSP-CuCl2为催化剂,能够以高产物收率制备出一系列炔胺类化合物.OSP-CuCl2可通过简单的过滤方式进行回收,并至少可循环使用6次.初步放大实验表明,炔胺类化合物能够以150 mmol的规模制备(87%收率).     

Molecule motion at polymer brush interfaces from single‐molecule experimental perspectives

Polymer brushes have been widely used as functional surface coatings for broad applications including antifouling, energy storage, and lubrications. Understanding the molecule dynamics at polymer brush interfaces is important in unraveling the structure–property relationships in these materials and establishing a new materials design paradigm of novel functional polymer thin films with efficient interfacial transport. By applying modern fluorescence‐based single‐molecule spectroscopic and microscopic techniques, molecule dynamics at varied polymer brush interfaces have been experimentally investigated in recent years. New insights are given to the understandings of some unique and unusual materials properties of polymer brush thin films. This review summarizes some recent studies of molecular diffusion at polymer brush interfaces, highlights some new understandings of the interfacial properties of polymer brushes, and discusses future research opportunities in this field. © 2013 Wiley Periodicals, Inc. J. Polym. Sci. Part B: Polym. Phys. 2014 , 52, 85–103